We export PE wax.
Brief:
- Namely polyethylene with low molecular weight. Softening point (> 100? ), which is similar to polyethylene with high molecular weight; viscosity and rigidity for dissolving and melting are close to paraffine wax. Excellent lubricant and dispersant with stable chemical and electrical performance. Soluble in hydrocarbon polymer (aromatic).
Formula: -[CH 2 -CH 2]N
Application:
- Compatible with polyethylene (PE), polypropylene (PP), polyvinyl acetate, polyvinyl chloride (PVC), ethylene-propylene rubber and butyl rubber. Improve fluidity of PE, PP and ABS (acrylonitrile butadiene styrene); enhance mould release of polymethyl methacrylate (PMMA) and polycarbonate (PC). Stronger internal lubrication in contrast with PVC and external lubricant. In addition, good for printing ink, paper, condensed masterbatch, photo/biodegradable masterbatch, mulching film, candle, paint, adhesive and cement.
Data:
Item code |
Softening point (? ) |
Acid value (mg KOH/g) |
PEW-1 |
100-103 |
< 0.5 |
PEW-2 |
103-105 |
< 0.5 |
PEW-3 |
105-107 |
< 0.5 |
PEW-4 |
108-110 |
< 0.5 |
PEW-5 |
110-115 |
< 0.5 |
PEW-6 |
118-120 |
< 0.5 |
Appearance: white powder
Molecular weight: 2,000-4,000
Resin |
Adding ratio (%) |
PE |
2 |
ABS |
0.6 |
PVC |
0.4-0.6 |
PMMA |
0.1-0.2 |
PC |
0.1-0.2 |
We export oxidized PE wax.
Brief:
- Namely polyethylene with low molecular weight. Softening point (> 100? ), which is similar to polyethylene with high molecular weight; viscosity and rigidity for dissolving and melting are close to paraffine wax. Excellent lubricant and dispersant with stable chemical and electrical performance. Soluble in hydrocarbon polymer (aromatic).
- Oxidized polyethylene wax has molecular chain with hydroxy, therefore oxidized polyethylene wax has better compatibility with polar polymer. Excellent lubricant (internal and external) and dispersant for PVC.
Composition: Low molecular weight polyethylene with hydroxy and carboxy.
Application:
- Compatible with polyethylene (PE), polypropylene (PP), polyvinyl acetate, polyvinyl chloride (PVC), ethylene-propylene rubber and butyl rubber. Improve fluidity of PE, PP and ABS (acrylonitrile butadiene styrene); enhance mould release of polymethyl methacrylate (PMMA) and polycarbonate (PC). Stronger internal lubrication in contrast with PVC and external lubricant. In addition, good for printing ink, paper, condensed masterbatch, photo/biodegradable masterbatch, mulching film, candle, paint, adhesive and cement.
- Rigid PVC (transparent and opaque), PVC moulding and tubing, PE/PVC material for cable and wire, softner material for spinning and weaving, car wax and leather.
Appearance: white powder with light yellow
Molecular weight: 3,000-4,000
Data:
Item code |
Softening point (?) |
Acid value (mg KOH/g) |
OPEW-1 |
100-107 |
7-15 |
Please
contact us via greenpoly@greenpoly.com,
export@greenpoly.com for details.
©2005 Greenpoly Group Limited. All rights reserved. |
